Click to email me

Sitemapper
Metal Electonics Case

The metal electronics case is more secure than the original and has improved the RAMBo board and chassis mounting.  The new lid is relatively easy to remove and replace for access to the board and cables.  The upgrade was quite straight forward following the MakerGear guidance.

 

IMGP6220

Figure 1.  New Metal RAMBo Case

 

If you have any questions, comments or suggestions please email me.  I will respond.  Otherwise click here to navigate to installing a metal extruder motor mount...

[Turtles are Here] [Site Map] [750Z Housing] [Construction] [A20 Housing] [Drawings] [Galapagos] [Data Logger] [Making PCBs] [PCB Drill] [CD Welder] [Current Monitor] [Proportional Controller] [Lock In Amplifier] [NAD C 520] [Kenwood Tape Deck] [Tape to Computer] [Reflow Oven] [Designed to Fail] [M2 3D Printer] [Assembly] [Prints] [Objects de-Art] [Lab Gear] [Surface Finish] [Blocked Nozzle] [M2 Upgrades] [Flexing Prints] [Print Problems] [Extruder Failure] [X, Y & Z Calibration] [NinjaFlex] [Gears] [Coil Winders] [Changing a Light Bulb] [Squash Racquet Repair] [Dive Photos] [Sand Casting] [Oxy-MAPP] [Lathe Maintenance] [Thermal Adhesive] [M73 Compass Repair] [Calcium Block for Turtles] [Infinite R Network] [ST7820 LCD] [Northern Lights] [Links] [Contact Me]